JSPEC 2.5" Suspension System | 2007-2018 Jeep Wrangler JK (4 Door) RHD
Jspec Suspension 2.5" Wrangler 4dr Kit
- Front and rear dual rate coils springs
- JSPEC Custom Valve Gas Shocks
or FOX 2.0 Adventure Series Shocks
or FOX 2.0 w/ Remote Reservoir Performance Series Shocks
- JKS MFG front adjustable trackbar
- JKS MFG front sway bar quicker disconnects
- Front and rear brake line relocation
- Rear track bar bracket
- Front and rear bump stop extensions
- Rear Trackbar Brace [JKS PN: OGS169] is strongly recommended to reinforce weak factory mount on axle.
- Max. Recommended Tire Size 35x12.50 on 16x8 wheels with 4.5" backspacing
- Rubicon Sway Bar Link hardware included.
JSPEC Suspension packages are the ultimate dual purpose suspension system for a JK owner who wants to build a daily driven, weekend wheeled JK Wrangler. No additional components are required to create a well-mannered Jeep that can handle the daily commute as well as it handles the trails. JSPEC suspension systems are also the perfect starting point for the off roader who wants to customize their JSpec Equipped JK Wrangler, with a modular design that can be upgraded with JKS control arms, brackets, steering upgrades, braces, gussets, and speed bumps, to tailor your Jeeps performance to your needs. Choose from our most popular upgrades here, or dive deep into the JKS online catalog to build you JK into an off-road monster you can drive every day!
Front and Rear Dual Rate Coil Springs
At the heart of any true Jeep suspension system are properly designed coil springs. Not everyone uses their Jeep for the same purposes, therefore you need a system that adapts to different terrains both on and offroad. By developing tuned sets of dual rate coils springs, JSPEC coils provide the best performance in any situation. Whether loaded down with gear for a weeklong expedition, running light for some rock-crawling fun or loaded with a few friends for a trip to the beach, JSPEC coils will provide the ride you want and the performance you need.
JKS Adjustable Front Track Bar
When you think of adjustable Jeep track bars you think JKS. For years, Jeep owners the world over have trusted JKS adjustable track bars for their strength, fit, function and durability. For those reasons it is a "no-brainer" that a JKS front adjustable track bar be an integral part of all JSPEC JK suspension systems. The JKS adjustable track bar dwarfs the factory unit using durometer specific rubber bushings at each end of the bar for smooth, quiet operation. The 1-1/4"-12 threaded adjustable end provides fine-tune adjustability and superior strength when combined with the 1-1/2" x 3/8" wall DOM tube, CNC formed track bar. Adding an adjustable track bar versus a relocation bracket also keeps the JKs steering angles in-phase to provide great handling and keep bump steer in check.
JKS Front Sway Bar Quicker Disconnects
The flag-ship JKS Manufacturing product is the Quicker Disconnect. JKS was the originator of the sway bar disconnect concept. That original concept was perfected with the Quicker Disconnect design which still remains the best sway bar disconnect on the market today. Adjustable length and greasable with JKS-exclusive poly-flex ball, high-misalignment ends, the Quicker Disconnect is everything you want in a sway bar disconnect. Stainless steel mounting studs provide an anchoring point for each end of the links and allow for easy removal and installation. For JK Rubicon owners, additional hardware is included to bolt the swaybar link and allow you to take advantage of the benefits of these links while retaining the function of your factory installed electronic disconnecting swaybar system.
Front and Rear Brake Line Relocation
How much can you say about brake line relocation? Well, it is a necessity anytime a JK is lifted much over 2", especially with longer travel shocks. In most kits on the market these items are an after-thought, but not in the JSPEC kits. The JKS brake line brackets included in the JK JSPEC suspension systems utilize the factory brake line mounting holes and locating tabs. This ensures that the brackets won't rotate and eventually come loose. The brackets were designed specifically to work with the shock lengths used with each JSPEC system. The result is just enough length at full axle droop with minimal modifications to the factory routing.
Rear Track Bar Bracket
As with the front suspension, the rear requires modification to the factory track bar setup to compensate for the new ride height. While the front gets a new track bar, the rear is adjusted with a track bar relocation bracket. The relocation bracket was chosen here for a several reasons. First, by raising the track bar mount position at the axle we flatten the track bar angle and make a slight adjustment to the roll-center height, which improves handling and body roll. Second, the new track bar relocation bracket doubles as a factory axle bracket brace. The factory rear axle track bar mount has been a known weak link since the JK was first built in 2007. By making the new relocation bracket out heavy-duty 3/16" steel and bracing directly to the axle tube, the factory bracket is reinforced and up to the task of handling the new lifted height of the JSPEC suspension system.
Front and Rear Bump Stop Extensions
The front and rear bump stop extensions, like brake line relocation brackets, are another component that usually doesn't get much attention with most lift "kits" on the market. The bump stop extensions in the JK JSPEC suspension systems were made specifically to maximize suspension travel while maintaining safe compression limits for both the coil springs and Fox 2.0 shocks. The front extensions are made from 2-3/4" billet aluminum while the rear extensions are made from heavy-wall steel rectangular tube. Both sets fasten directly to the axle and are made to hold up to the abuse your new JSPEC equipped JK is now built to handle.
- Temporarily Not Available
- Item Requires Shipping
- 145.0 lbs.
- W12.0000” x H12.0000” x L36.0000”
Total Reviews (0)
Write the First Review!
You must login to post a review.